Wurth Carburetor and Injection Cleaner Spray (500ml)
Restore peak engine efficiency and smooth throttle response with the professional-grade Wurth Carburetor and Injection Cleaner (500ml). This highly effective system formulation is specifically engineered for both 2-stroke and 4-stroke engines. It allows for deep, residue-free cleaning without requiring a time-consuming engine or component teardown. It easily reaches overhead valves, manifold heat controls, and hard-to-reach areas to clear performance-robbing blockages instantly.
Formulated on a complex chemical basis of organic solvents with a density of 0.8 g/cm³, this high-pressure aerosol spray acts within seconds on stubborn gum, lacquer, resin, and varnish deposits. It completely dissolves contamination down to the bare metal, unblocking dirty passages, freeing bound linkages, and correcting stuck automatic chokes. The rapid evaporation rate ensuring that components dry clean with zero sticky film left behind.
Key Product Features & Performance Benefits:
- Instant Bare-Metal Cleaning: Cuts through heavy carbon crusts, gums, and lacquer on throttles and carburetors in seconds.
- Component Teardown Not Required: Advanced aerosol spray reaches deep into linkages, passages, and overhead valves dynamically while intact.
- Fixes Rough Idling & Stuttering: Resolves engine running issues caused by dirty throttle plates, giving you a smooth and quiet idle.
- Optimizes Throttle Valve Operation: Restores factory-level mechanical precision to moving components and air intake actuators.
- Universal Engine Application: Fully compatible and highly safe for both high-revving 2-stroke and standard 4-stroke vehicle power plants.
Technical Specifications & Application Parameters:
| Product Form |
Pressurized Aerosol Spray Can (500ml) |
| Chemical Basis |
Mix of High-Grade Organic Solvents |
| Density & Fragrance |
0.8 g/cm³ | Characteristic Fragrance Profile |
| Shelf Life |
12 Months from the date of manufacturing |
| Target Application Areas |
Carburetors, injection nozzles, throttle bodies, automatic chokes, and mechanical linkages |
How to Apply / Usage Instructions:
- Turn off the vehicle engine, remove the protective air intake boot/filter housing to uncover the throttle body intake or carburetor throat.
- Shake the spray can thoroughly. Spray directly onto dirty linkages, sliding surfaces, and butterfly valves while the engine components are cool.
- Allow the solvents to penetrate and dissolve the debris for 1 to 2 minutes. Start the engine and spray lightly into the throat while revving the engine slightly to flush out loose internal carbon.
- Note: Protect painted bodywork and sensitive external plastics from overspray contact during application.
